| VL-352 Video Cassette Loader |
| This product has been discontinued. |
|
Specifications
|
| V-0 Cassette | EIAJ Standarad VHS format
Hub diameter: 26 mm, 62 mm |
| Magnetic Tape | Tape width: 12.65 ±0.02 mm
Thickness: 20 ±2 μm, 14 ±2 μm
Pancake Diameter Max 16.5 inches (420 mm)
Hub: NAB type |
| Leader Tape | Minimum Leader Length: 361 mm (between hub centers)
Width: 12.65 ±0.03 mm. Thickness: 40 ±5 μm |
| Splicing Tape | Outer Diameter: max. 80 mm
Width: 12.2 ±0.1 mm
Thickness: 17 to 30 μm
Polyester based, adhesive added
Inner Diameter (Core): 1 inch
Recommended: Nitto No. 325N or equivalent |
| Cleaning Tape | Width: 25±0.1 mm
Core Inner Diameter: 1 inch
Outer Diameter: max. 80 mm |
| Winding Tension | Constant tension (50 to 150 g) Air chamber system
Number of Winding Conditions: 99 |
| Winding Speed | 1 to 30 m/s (set in 1 m steps)
Acceleration/Deceleration: 1 to 5 m/s2 |
| Tape Counter Accuracy | +0.5 % or +1 m whichever larger and -0% for preset length |
| Pinhole Detection | Detectable Area: min. 0.5 mm2 |
| Splicing Accuracy | Conformes to EIAJ standard |
| Dimension (W x H x D) | 650 x 1,570 x 640 mm |
| Weight | approx. 230 kg (508 lbs) |
| Power Requirements | Voltage: 100, 110, 117, 200, 220, 240 VAC (±10)
Frequency: 50/60 Hz
Power Consumption: 500 VA
Compressed Air: min. 500 kPa
Air Consumption: 120 Nl/min.
Vacuum Source: Internal Air Ejector |
| Optional Kits | SR-9U: Signal Tower
ZL-16V: Hot Stamper Unit
GR-22E: Air Guide
GR-22F: Air Guide
GR-22T: Air Guide System
GR-23R: Air Guide R
KL-11M: Variable Speed Tape Cleaning System
KH-21X: Tape Surface Detector Type A
KH-21Y: Tape Surface Detector Type B
KW-21X: Leader Tape Rewind Motor
AS-76DA: Sponge Filter
SE-16PA: Stack Guide
KH-21Z: Cue Tone Detector
ZA-44T/ZA-44TA: mini-Pro Kit
Central Control System
Central Exhaust System
Central Vacuum System
PB-85YA: Extender PCB
ZT-12K: Maintenance Jig Assy
ZT-12F: Simplified Maintenance Jig Assy |
|
Specifications are subject to change without notice or obligation.
|
home