| This product has been discontinued. |
|
Specifications
|
| Number of Recording Units |
2 |
| Pancake Diameter |
max. 12.5" |
| Magnetic Tape |
Type I (Normal) or Type II (Chrome) |
| Tape Width |
0.15" (cassette tape width) |
| Tape Speed (Copy Speed) |
Two speeds selectable from 120 ips (64x), 150 ips (80x), 240 ips (128x), 300 ips (160x), and 375 ips (200x) |
| Number of Tracks |
4 |
| Record Head |
2-track ferrite head x 2 |
| Record Equalization |
2 settings (customer selection) |
| Record Bias |
2 master bias settings (remotely switchable) |
| Record Amplifier |
1 channel x 8 |
| Record Signal Input |
Flat frequency response. BNC type connector. Min. 10 kΩ input impedance |
| Tape Drive |
Capstan = PLL servo DC direct drive motor
Supply Reel and Take-up Reel = AC motor |
| Remote Control |
Parallel communication (Start/Stop, Bias A/B, EQ 1/2). D-sub 25-pin connector |
| Frequency Response |
40 Hz to 18 kHz, +2/-3 dB (64 to 128x)
40 Hz to 15 kHz, +2/-3 dB (160x)
100 Hz to 16 kHz, ±2 dB (64 to 128x)
100 Hz to 12 kHz, ±2 dB (160x) |
| Signal-to-Noise Ratio |
Less than 4 dB (for blank tape) |
| Distortion |
Less than 3% |
| Wow & Flutter |
Less than 0.1% (DIN45507 PEAK WTD) |
| Crosstalk |
min. 65 dB (between CHs 2 & 3, @ 1 kHz)
min. 35 dB (between CHs 1 & 2, @ 1 kHz) |
| Speed Deviation |
Within ±0.15% |
| Operating Environment |
10 to 30°C, 20 to 80% RH |
| Storage Environment |
-20 to 45°C, 10 to 80% RH |
| Power Requirement |
100/110/117/200/220/240 VAC, ±5%, 50/60 Hz |
| Power Consumption |
550 VA (peak 700 VA) |
| Weight |
87 kg |
| Dimensions (W x H x D) |
870 x 912 x 400 mm |
| Accessories |
Fuse (time lag) x 1, Cleaning tape (installed) x 2, Audio connection cable x 1, Control connection cable x 1, GND wire x 1, Power cord x 1, Operation manual x 1 |
|
Specifications are subject to change without notice or obligation. |
home