| PD-80 8ch Digital Audio Disk Recorder/Editor |
| This product has been discontinued. |
|
Specifications
|
System |
| Type | Digital Audio Disk Recorder/Editor |
| Drive | High-speed 3.5" MO disc drive or hard disk drive |
| Recording Time | max. 120 track-minutes (44.1 kHz fs, 640 MB disc) |
| Quantization | 16-bit |
| A/D Conversion | 20-bit ΔΣ64x Oversampling |
| D/A Conversion | 20-bit 8x Oversampling |
| 8ch Analog Audio I/O | Mode: Transformerless Active Balanced
Input Impedance: min. 10 kΩ
Output Impedance: max. 50Ω
Load Impedance: min. 600Ω
Ref. Level: +4 dBu (-15 dB from digital full-scale)
Max. Input Level: +26 dBu
Max. Output Level: +24 dBu
Connector: D-sub 25-pin (female) |
| 4ch Digital Audio I/O | EIAJ CP-1201/IEC 958 (AES/EBU) Digital Interface with pulse transformer
I/O Impedance: 110Ω
Connector: IN = XL-3-31 type, OUT = XL-3-32 type |
| Headphone Output | Load Impedance: min. 8Ω
Output Level: 20 mW (8Ω load)
Connector: μ6.3-mm stereo phone jack (mono mix output) |
| Frequency Response | 20 Hz to 22 kHz ±0.5 dB (fs = 48 kHz) |
| Signal-to-Noise Ratio | min. 90 dB (DIN audio filter) |
| Distortion (THD+N) | Less than 0.01% (max. level 0 dB, 1 kHz, 80 kHz LPF) |
| Dynamic Range | min. 95 dB (EIAJ, 1 kHz, -60 dB, A-WTD) |
| Crosstalk | min. 100 dB (1 kHz) |
|
Miscellaneous |
| Electric Power Supply Requirement | 100 to 120, 200 to 240 VAC ±10%, single phase 50/60 Hz |
| Power Consumption | max. 95 VA |
| Operating Environment | Temperature: 5 to 35°C, Relative Humidity: 20 to 80% |
| Weight | PD-80: 14 kg, CB-164: 3 kg |
| Dimensions | PD-80: 482 x 132 x 450 mm (EIA rack 3U), CB-164: 430 x 65 x 221.5 mm |
| Option | ZA-63NA- 10-m Remote Cable
ZA-63NB- 20-m Remote Cable
ZA-62W-- 0.5-m Link Cable
ZA-62WA- 1.8-m Link Cable
ZA-37Y-- Additional 3.5" MO Disc Drive
ZA-37Z-- Additional 1 GB Hard Disk Drive (with brackets)
ZA-38N-- Additional 2 GB Hard Disk Drive (with bracket)
ZA-99T-S Multichannel Digital I/O Kit |
|
Specifications are subject to change without notice or obligation.
|
home