return to homehome
PD-20 2ch MO Disc Recorder/Editor
This product has been discontinued.
Features | Specifications
TypeOptical MO Disc Digital Audio System
DriveHigh-speed 3.5-inch MO Disc Drive
Recording Timemax. 120 track-minutes (44.1 kHz fs, 640-MB disc)
No. of Quantization Bits16
A/D Conversion20-bit ΔΣ 64x Oversampling
D/A Conversion20-bit 8x Oversampling
2ch Analog Audio I/OMode: Tranformerless active balanced
Input Impedance: min. 10 kΩ
Output Impedance: max. 60Ω
Load Impedance: min. 600Ω
Ref. Level: +4 dBu (-3.5 to +8.5 dBu adjustable on board. -15 dB from digital full-scale)
Ref. Input Level Switching: +4 dBu/-10 dBV/-50 dBu
Ref. Output Level Switching: +4 dBu/-10 dBV
Max. Input Level: Ref + 22 dBu
Max. Output Level: Ref + 20 dBu
Input Connector: XL-3-31 (female) x 2
Output Connector: XL-3-32 (male) x 2
2ch Digital Audio I/OEIAJ CP-1201/IEC 958 (AES/EBU) Digital Interface with pulse transformer
No. of Input/Output Bits: 16
I/O Impedance: 110Ω
Input Connector: XL-3-31 (female) x 1
Output Connector: XL-3-32 (male) x 1
Headphone OutputLoad Impedance: min. 8Ω
Output Level: 20 mW (8Ω load)
Connector: φ6.3-mm stereo phone jack x 1
Frequency Response10 Hz to 22 kHz±0.5 dB (fs = 48 kHz)
10 Hz to 20 kHz±0.5 dB (fs = 44.1 kHz)
10 Hz to 14.5 kHz±0.5 dB (fs = 32 kHz)
Signal-to-Noise RatioBetter than 91 dB (0 dBFS, with DIN audio filter)
Distortion (THD+N)Less than 0.008% (0 dBFS, 1 kHz, 80 kHz LPF)
Dynamic RangeBetter than 96 dB (EIAJ, 1 kHz, -60 dB, A-WTD)
CrosstalkBetter than 100 dB (1 kHz)
Electric Power Requirement100 to 120 VAC, 200 to 240 VAC (±10%), single phase 50/60 Hz
Power Consumptionmax. 47 VA (34 W)
Operating EnvironmentTemperature: 5 to 35°C, Relative Humidity: 20 to 80%
WeightPD-20: 6.6 kg, CB-170: 2.2 kg
Dimensions (W x H x D)PD-20: 482 x 88 x 331 mm (EIA rack 2U), CB-170: 430 x 48 x 132 mm
Optional AccessoriesRemote Controller CB-170: CB-170-S
10-m Remote Cable: ZA-63NA-
20-m Remote Cable: ZA-63NB-
Specifications are subject to change without notice or obligation.