Specifications | | Number of Recording Units | 2 | | Pancake Diameter | max. 12.5" | | Magnetic Tape | Type I (Normal) or Type II (Chrome) | | Tape Width | 0.15" (cassette tape width) | | Tape Speed (Copy Speed) | Two speeds selectable from 120 ips (64x), 150 ips (80x), 240 ips (128x), 300 ips (160x), and 375 ips (200x) | | Number of Tracks | 4 | | Record Head | 2-track ferrite head x 2 | | Record Equalization | 2 settings (customer selection) | | Record Bias | 2 master bias settings (remotely switchable) | | Record Amplifier | 1 channel x 8 | | Record Signal Input | Flat frequency response. BNC type connector. Min. 10 kΩ input impedance | | Tape Drive | Capstan = PLL servo DC direct drive motor
Supply Reel and Take-up Reel = AC motor | | Remote Control | Parallel communication (Start/Stop, Bias A/B, EQ 1/2). D-sub 25-pin connector | | Frequency Response | 40 Hz to 18 kHz, +2/-3 dB (64 to 128x)
40 Hz to 15 kHz, +2/-3 dB (160x)
100 Hz to 16 kHz, ±2 dB (64 to 128x)
100 Hz to 12 kHz, ±2 dB (160x) | | Signal-to-Noise Ratio | Less than 4 dB (for blank tape) | | Distortion | Less than 3% | | Wow & Flutter | Less than 0.1% (DIN45507 PEAK WTD) | | Crosstalk | min. 65 dB (between CHs 2 & 3, @ 1 kHz)
min. 35 dB (between CHs 1 & 2, @ 1 kHz) | | Speed Deviation | Within ±0.15% | | Operating Environment | 10 to 30°C, 20 to 80% RH | | Storage Environment | -20 to 45°C, 10 to 80% RH | | Power Requirement | 100/110/117/200/220/240 VAC, ±5%, 50/60 Hz | | Power Consumption | 550 VA (peak 700 VA) | | Weight | 87 kg | | Dimensions (W x H x D) | 870 x 912 x 400 mm | | Accessories | Fuse (time lag) x 1, Cleaning tape (installed) x 2, Audio connection cable x 1, Control connection cable x 1, GND wire x 1, Power cord x 1, Operation manual x 1 |
|
Specifications are subject to change without notice or obligation. |
home