DB-10 Digital On-Air Console |
Specifications | Microphone Input | Input Sensitivity: -66 to -10 dBu Microphone Gain: +14 to 70 dB Insert Level: ±0 dBu Input Impedance: 2 kΩ Frequency Response: +0, -1 dB @ 20 Hz to 20 kHz. +0, -3 dB @20 Hz to 20 kHz (with max. mic gain) THD+N: Less than 0.007% (@1 kHz, -1 dBFS). Less than 0.01% (@1 kHz, -20 dBFS) Crosstalk: min. 100 dB (@1 kHz) Mic EIN: Less than -120 dB (@1 kHz, with DIN audio filter)). Less than -122 dB (@1 kHz, A-WTD) A/D Converter: 24-bit | Line Input | Reference Level: +4 dBu or -10 dBV (= -20, -18, -16 dBFS) Input Level: -8 to +16 dBu. -40 to +16 dBu @ line inputs 3 & 4 (pad = on) Max. Level: +24, +22, +20 dBu (= 0 dBFS) Line Gain: ±12 dB Input Impedance: 10 kΩ Frequency Response: +0, -0.1 dB @20 Hz to 20 kHz THD+N: Less than 0.007% (@1 kHz) Signal-to-Noise Ratio: min. 108 dB, with DIN audio filter Crosstalk: min. 100 dB (@1 kHz) A/D Converter: 24-bit | Digital Input | Format: AES = AES3 1992, SPDIF = IEC60958-3 Input Impedance: AES = 110Ω, SPDIF = 75Ω | Analog Output | Reference Level: +4 dBu Max. Level: +24, +22, +20 dBu (= 0 dBFS) Output Impedance: 40Ω D/A Converter: 24-bit | Digital Output | Format: AES = AES3 1992, SPDIF = IEC60958-3 Output Impedance: AES = 110Ω, SPDIF = 75Ω | Equalizer | HF: Peak/Shelving, 5 kHz to 16 kHz, Q = 0.1 to 15, ±18 dB MF: Band Sweep, 200 Hz to 12 kHz, Q = 0.1 to 15, ±18 dB LF: Peak/Shelving, 50 Hz to 500 Hz, Q = 0.1 to 15, ±18 dB | High-pass Filter | 80 Hz and 160 Hz, -18 dB/oct. | Input Delay Time | 0 to 20.0 ms | Compressor | Threshold Level: 0 to -40 dBFS Attack Time: 1.0 to 200 ms Release Time: 5 ms to 5 s Compression Ratio: 1/1.0 to 1/20 | Limiter | Threshold Level: 0 to -40 dBFS Ratio: 1/1.0 to 1/30 | Overload Indication Sensitivity | Input Detection: -20 dBu Level Over: -6 dBFS | Operating Environment | Temperature Range: 5 to 40°C Relative Humidity: 20 to 80% | Weight | DB-10: 21.5 kg PSU: 9.5 kg | Power Supply | 100-240 VAC (±10%), 24 VDC (option) Phantom Power: +48 ±0.1 VDC | Dimensions | DB-10: 610 x 181 x 585 mm PSU: 482 x 88 x 390 mm | Measurement Conditions | Channel input fader and master fader set to 0-dB mark. Line output terminated with 100 kΩ. Ext. Source Impedance ≤ 200Ω All data valid within bandwidth of DIN audio filter (unweighted) Operating level 0 VU = +4 dBu (+0, +6 dBu) 0 dBu = 0.7746 V. Usually +24 dBu = 0 dBFS (full-scale) |
| Specifications are subject to change without notice or obligation. |