| This product has been discontinued. |
|
Specifications
|
Transport |
| No. of Recording Units | 2 |
| Pancake Diameter | max. 12.5" |
| Tape | Type I (normal) |
| Tape Width | 0.15" cassette tape |
| No. of Tracks | 4 |
| Tape Speed (copy speed) | 60 ips (32x cassette tape speed) |
| Speed Deviation | Within ±0.15% |
| Wow & Flutter | Less than 0.1% (DIN 45507 PEAK WTD) |
| Tape Drive | PLL servo DC direct drive capstan motor
AC take-up and supply reel motors |
|
Electronics |
| Head | In-line 4-track ferrite head |
| Equalization | One EQ setting for 32x |
| Bias | Two BIAS settings (remotely switchable, master bias type) |
| Record Amplifier | 4 channels in 2 systems |
| Record Signal Input | Frequency Response: Flat
Connector: BNC type (CH1-4)
Input Impedance: min. 10 kΩ |
| Frequency Response | 40 Hz to 18 kHz, +2/-3 dB (32x)
100 Hz to 16 kHz, ±2 dB (32x) |
| Signal-to-Noise Ratio | Within 4 dB of blank tape |
| Distortion | Less than 3% |
| Crosstalk | Less than 50 dB (CH2 to CH3, @1 kHz)
Less than 30 dB (CH1 to CH2, @1 kHz) |
| Remote Control | Commands: START, STOP, BIAS A/B
Type: Parallel communication
Connector: D-sub 9-pin type |
|
Physical |
| Power Supply | 100, 110, 117, 200, 220, 240 VAC ±5%, 50/60 Hz |
| Power Consumption | 480 VA (max. 760 VA) |
| Weight | 70 kg |
| Dimensions (W x H x D) | 870 x 894 x 430 mm |
| Operating Environment | 10 to 30°C, 20 to 80% RH |
| Storage Environment | -20 to 45°C, 10 to 80% RH |
|
NOTE: The above system characteristics are an example of the performance of the DP-35 under conditions specified separately, and Otari has no obligation to guarantee these characteristics.
Specifications are subject to change without notice or obligation.
|
home