| DB-10 Digital On-Air Console |
| This product has been discontinued. |
|
Specifications
|
| Microphone Input |
Input Sensitivity: -66 to -10 dBu
Microphone Gain: +14 to 70 dB
Insert Level: ±0 dBu
Input Impedance: 2 kΩ
Frequency Response: +0, -1 dB @ 20 Hz to 20 kHz. +0, -3 dB @20 Hz to 20 kHz (with max. mic gain)
THD+N: Less than 0.007% (@1 kHz, -1 dBFS). Less than 0.01% (@1 kHz, -20 dBFS)
Crosstalk: min. 100 dB (@1 kHz)
Mic EIN: Less than -120 dB (@1 kHz, with DIN audio filter)). Less than -122 dB (@1 kHz, A-WTD)
A/D Converter: 24-bit |
| Line Input |
Reference Level: +4 dBu or -10 dBV (= -20, -18, -16 dBFS)
Input Level: -8 to +16 dBu. -40 to +16 dBu @ line inputs 3 & 4 (pad = on)
Max. Level: +24, +22, +20 dBu (= 0 dBFS)
Line Gain: ±12 dB
Input Impedance: 10 kΩ
Frequency Response: +0, -0.1 dB @20 Hz to 20 kHz
THD+N: Less than 0.007% (@1 kHz)
Signal-to-Noise Ratio: min. 108 dB, with DIN audio filter
Crosstalk: min. 100 dB (@1 kHz)
A/D Converter: 24-bit |
| Digital Input |
Format: AES = AES3 1992, SPDIF = IEC60958-3
Input Impedance: AES = 110Ω, SPDIF = 75Ω |
| Analog Output |
Reference Level: +4 dBu
Max. Level: +24, +22, +20 dBu (= 0 dBFS)
Output Impedance: 40Ω
D/A Converter: 24-bit |
| Digital Output |
Format: AES = AES3 1992, SPDIF = IEC60958-3
Output Impedance: AES = 110Ω, SPDIF = 75Ω |
| Equalizer |
HF: Peak/Shelving, 5 kHz to 16 kHz, Q = 0.1 to 15, ±18 dB
MF: Band Sweep, 200 Hz to 12 kHz, Q = 0.1 to 15, ±18 dB
LF: Peak/Shelving, 50 Hz to 500 Hz, Q = 0.1 to 15, ±18 dB |
| High-pass Filter |
80 Hz and 160 Hz, -18 dB/oct. |
| Input Delay Time |
0 to 20.0 ms |
| Compressor |
Threshold Level: 0 to -40 dBFS
Attack Time: 1.0 to 200 ms
Release Time: 5 ms to 5 s
Compression Ratio: 1/1.0 to 1/20 |
| Limiter |
Threshold Level: 0 to -40 dBFS
Ratio: 1/1.0 to 1/30 |
| Overload Indication Sensitivity |
Input Detection: -20 dBu
Level Over: -6 dBFS |
| Operating Environment |
Temperature Range: 5 to 40°C
Relative Humidity: 20 to 80% |
| Weight |
DB-10: 21.5 kg
PSU: 9.5 kg |
| Power Supply |
100-240 VAC (±10%), 24 VDC (option)
Phantom Power: +48 ±0.1 VDC |
| Dimensions |
DB-10: 610 x 181 x 585 mm
PSU: 482 x 88 x 390 mm |
| Measurement Conditions |
Channel input fader and master fader set to 0-dB mark.
Line output terminated with 100 kΩ. Ext. Source Impedance ≤ 200Ω
All data valid within bandwidth of DIN audio filter (unweighted)
Operating level 0 VU = +4 dBu (+0, +6 dBu)
0 dBu = 0.7746 V. Usually +24 dBu = 0 dBFS (full-scale) |
|
Specifications are subject to change without notice or obligation. |
home