return to homehome
PW-10 DVD-R PreWriter
This product has been discontinued.
Features | Specifications
Specifications
Disc CapacitySupply & Eject Sides = 6 spindles (About 170 discs per spindle. Disc capacity depends on spindle shape. For details, contact Otari)
Independent rejected disc reciever for supply and eject sides. Each reciever can contain about 80 discs.
Writer Drive Layout2 (horiz) by 5 (vert)
The drive dock section has afloating construction to mechanically isolate it from the chassis.
Supported Disc Shapeφ12 cm (Support for 8-cm disc is optional and requires adaptors)
User InterfacePC monitor, keyboard, and mouse are used to setup and operate the machine.
Double-Feed PreventionDisc separator mechanism and double-feed detection sensors
Transparent Disc RejectionTransparent protection in supply disc stacks are rejected on to rejected disc reciever without stopping production.
Disc Transfer Timeapprox. 7.2 s (2-drive eject and supply operation)
(The actual transfer time can vary according to drive to a drive's tray close/open time, etc.)
Productivitymax. approx. 1,000 discs per hour (excl. spindle exchange time and variations due to drives and media)
OptionsCentralized Vacuum System, Centralized Exhaust System, Adapter for 8-cm Disc
ControlsPOWER Switch, EMERGENCY STOP Switch, TURNTABLE TURN Switch, PC Monitor*, Keyboard, and Mouse. (* provided by the user)
Dimensions1,050 x 1,600 x 920 mm (W x H x D. With signal tower: H = 1,828 mm)
Weight330 kg
Electrical PowerSingle Phase 100, 117, 220, 240 VAC ±10%, 50/60 Hz
Power Consumption1 kVA
Air SourcePrimary Side Air Supply Pressure = Min. 0.5 MPa (dry air)
Air Consumption70 liters per minute (A.N.R.)
Vacuum SourceInternal ejector system (Optional external vacuum system available)
Specifications are subject to change without notice or obligation.