return to homehome
LW-10 Optical Wiring System
This product has been discontinued.
Features | Specifications
InputPad: Mic = 0 dB, Line = 18 dB
Input Impedance: Mic = 2 kΩ, Line = 10 kΩ
Ref. Level (+4 dBu): Mic = -64 dBu (VR max), -17 dBu (VR min). Line = -37 dBu (VR max), +10 dBu (VR min).
Max. Level (non-clipping, +24 dBu): Mic = -44 dBu (VR max), +3 dBu (VR min). Line = -17 dBu (VR max), +30 dBu (VR min)
Connector: Canare FK37-31S (female)
OutputOutput Impedance: max. 5Ω
Ref. Level: +4 dBu (-20 dB from peak)
Max. Level (non-clipping): +24 dBu (digital peak)
Connector: Canare FK37-32S (male)
Microphone Head AmplifierBalanced input. With +48-V phantom power
Headphone OutputImpedance: 8Ω
Connector: φ6.3-mm stereo phone jack (mono output)
Sample Rate48 kHz
A/D Conversion20-bit ΔΣ 64x Oversampling
D/A Conversion20-bit ΔΣ 8x Oversampling
Transmission DistanceLess than 3 km (direct output only). Less than 500 m (through output)
Frequency Response10 Hz to 22 kHz
Equivalent Input NoiseMic Input EIN: -129 dB (max. gain, 200Ω termination)
DistortionLess than 0.005% (1 kHz, peak)
Dynamic RangeBetter than 108 dB (1 kHz)
CrosstalkBetter than 100 dB (1 kHz)
Power Supply Requirement100 to 120 VAC, 200 to 240 VAC (±10%), single phase 50/60 Hz
Power Consumption350 VA (LW-10S), 300 VA (LW-10C)
Operating EnvironmentTemperature: -10 to 50°C, Relative Humidity: 20 to 80%
Weight20 kg (main unit), 10 kg (PSU)
Dimensions (W x H x D)482 x 265.5 x 400 mm (main unit), 482 x 132 x 400 mm (PSU)
OptionIntercom Interface (for ClearCom, RTS, Telex)
Control Data Interface (for RS-232C, RS-422A, MIDI)
Digital Through Output for LW-10C
Analog Monitor Output for LW-10C
Extender PCB Assembly
Specifications are subject to change without notice or obligation.