| DTR-8S Professional R-DAT Recorder |
| This product has been discontinued. |
|
Specifications
|
Transport |
| Mechanism | 2 head, tray type cassette loading |
| Track Format | IEC DAT standard |
| Tape Speed | 8.15 mm/s (standard play), 4.075 mm/s (long play) |
| Fast Wind Time | Less than 60 s (standard 120-min. tape) |
| Playback Start Time | Less than 3 s (from stop/pause) |
|
Electronics |
| Frequency Response | 20 Hz to 22 kHz ±0.5 dB (fs = 48 kHz)
20 Hz to 20 kHz ±0.5 dB (fs = 44.1 kHz)
20 Hz to 14.5 kHz ±0.5 dB (fs = 32 kHz) |
| Dynamic Range | min. 90 dB (EIAJ, 1 kHz, -60 dB, A-WTD) |
| Signal-to-Noise Ratio | min. 89 dB (emph. off, A-WTD)
min. 86 dB (emph. off, DIN audio) |
| Distortion (THD) | 0.007% (fs = 48 kHz, full-scale 1 kHz)
0.009% (fs = 44.1 kHz)
0.012% (fs = 32 kHz) |
| Crosstalk | min. 80 dB (1 kHz), min. 55 dB (20 Hz to 20 kHz) |
| Sample Rate | 48 kHz, 44.1 kHz, 32 kHz-LP, 32 kHz-SP |
| De-emphasis | 50μs, 15μs (automatic selection) |
| Meter | 16-segment peak level meter with peak hold |
|
Interface (0 dBu = 0.775 V) |
| Analog Audio Input | Mode: Transformerless active balanced
Impedance: 10 kΩ
Ref. Level*: +4 dBu/-10 dBV switchable
Max. Level: +26 dBu
Connector: XL3-31 type (pin 2 hot) |
| Analog Audio Output | Mode: Transformerless active balanced
Impedance: max. 50Ω
Load Impedance: min. 600Ω
Ref. Level*: +4 dBu/-10 dBV switchable
Connector: XL3-32 type (pin 2 hot) |
| Digital Audio I/O (AES/EBU) | Format: EIAJ CP-1201/IEC 958 (AES/EBU) digital interface with transformer
Min. Input Level: 0.2 Vp-p
Output Level: 3 to 10 Vp-p (110Ω load)
Impedance: 110Ω
Connector: IN = XL3-31, OUT = XL3-32 |
| Digital Audio I/O (COAXIAL) | Format: EIAJ CP-1201/IEC 958 (COAXIAL) digital interface without transformer
Min. Input Level: 0.2 Vp-p
Impedance: 75Ω
Connector: RCA socket |
| Headphone Output | Load Impedance: min. 8Ω
Level: 50 mW (32Ω)
Connector: 6.3-mm stereo phone jack |
| Parallel Control | Function: Play, Stop, Record, Pause, F.FWD, RWD, Track Next, Track Prev
Connector: 8-pin miniature DIN connector |
|
Miscellaneous |
| Power Supply Requirement | 100/120/230 VAC switchable, single phase 50/60 Hz |
| Power Consumption | Less than 35 W |
| Operating Environment | 5 to 35°C, 60% RH |
| Dimensions (W x H x D) | 483 x 128 x 383 mm |
| Weight | approx. 8 kg |
|
* -12 dB from full-scale digital zero.
Specifications are subject to change without notice or obligation.
|
home