return to homehome
DP-55 Slave Recorder
This product has been discontinued.
Features | Specifications
No. of Recording Units2
Pancake Diametermax. 12.5"
TapeType I (normal), Type II (chrome)
Tape Width0.15" cassette tape
No. of Tracks4
Tape Speed (copy speed)120 ips. (64x cassette tape speed)
Speed DeviationWithin ±0.15%
Wow & FlutterLess than 0.1% (DIN 45507 PEAK WTD)
Tape DriveCapstan Motor: PLL servo DC direct drive motor
Supply Reel and Take-up Motors: AC motor
Record Head2-track ferrite head x 2
EqualizationOne EQ setting (for 64x speed)
BiasTwo BIAS settings (remotely switchable, master bias type)
Record Amplifier1 channel x 8
Record Signal InputFrequency Response: Flat frequency response
Connector: BNC type (CH1 - CH4)
Input Impedance: min. 10 kΩ
Frequency Response40 Hz to 18 kHz, +2/-3 dB (64x)
100 Hz to 16 kHz, ±2 dB (64x)
Signal-to-Noise RatioWithin 4 dB of blank tape
DistortionLess than 3% (1 kHz, 250 nWb/m)
CrosstalkBetter than 65 dB (CH2 to 3, @1 kHz)
Better than 35 dB (CH1 to 2, @1 kHz)
Remote ControlCommands: START, STOP, BIAS A/B
Type: Parallel communication
Connector: D-sub 9-pin type
Power Supply100/110/117/200/220/240 VAC ±5%, 50/60 Hz
Power Consumption330 VA (peak 590 VA)
Weight76 kg
Dimensions (W x H x D)870 x 894 x 430 mm
Operating Environment10 to 30°C, 20 to 80% RH
Storage Environment-20 to 45°C, 10 to 80% RH
NOTE: The above system characteristics are an example of the performance of the DP-55 under conditions specified separately, and Otari has no obligation to guarantee these characteristics.
Specifications are subject to change without notice or obligation.