return to homehome
CM-50 DVD Casing Machine
This product has been discontinued.
Features | Specifications
Title Sheet Supply SectionCapacity = 500 pieces
Case Supply SectionCapacity = 100 pieces (plus additional 50 pieces on the side stack table). Continuous 400-piece supply (option).
Disc Supply Section4 spindles. Capacity = 150 discs per spindle
Booklet Supply Section2 stations. Capacity = about 500 pieces per station
Eject SectionClosed or half-closed case selectable
Operation Speedmax. 50 pieces per minute (30, 35, 40 or 45 pieces selectable)
Product Amount SettingThe target product amount can be set on the touch-panel. When this value is reached, the machine automatically stops production.
Detection MechanismsWhen there is an error in supplying of title sheets or cases, the machine stops immediately. If a booklet or disc is not inserted properly or a transparent disc is detected, that product is rejected at the final station.
Product Ejection Height780 mm
Work Supply HeightCase = approx. 1,150 mm (approx. 700 mm with optional supply unit)
Title Sheet = approx. 760 mm
Disc Spindle = approx. 440 mm
Booklet = approx. 830 mm
WorkContact Otari for recommended specifications for case, title sheet and disc
Dimensions (W x D x H)2,100 x 1,220 x 1,500 mm (incl. casters and jack-up bolts)
Weightapprox. 1,000 kg
Electric Power RequirementsSingle phase 200 VAC, 50/60 Hz
Power Consumptionmax. 1.5 kVA
Compressed Air Requirementmin. 0.6 MPa (dry air)
Compressed Air Consumptionmax. 350 litres per min. (A.N.R)
Specifications are subject to change without notice or obligation.