- Two basic types: Conveyor type for use with optional supply/eject conveyor syatem, and magazine type for stand-alone use.
- Cycle time and Production capacity per unit
Speed = 30 m/s, Accel/Deceleration = 5 m/s
| NTSC |
Cycle/Cassette |
Cassette/Hour |
PAL |
Cycle/Cassette |
Cassette/Hour |
| T-60 (128 m) |
17 s | 200 |
E-90 (130 m) |
17 s | 200 |
| T-90 (188 m) |
19 s | 185 |
E-120 (173 m) |
18.5 s | 190 |
| T-120 (248 m) |
20 s | 168 |
E-180 (259 m) |
20.5 s | 163 |
- 40-character x 2-line large size LCD can supply ample operating infomation.
- Maximum 99 channels to store tape length, winding speed, acceleration/deceleration speed, hub diameter, end of reel.
- Remnant Winding can load the remaining tape on the supply hub into cassettes by using the settings stored in another channel.
- Air guides are used for coated side of tape to reduce damage to magnetic tape coating. (air guides for base side are optional.)
- Pinhole detector and tape cleaner mechanism are provided.
- Cassette supply/eject conveyors are located in front of the loader which facilitates maintenance of the conveyor system and checking of cassettes.
- Optional Central control system provides production management and max. 254 units of loader control. Since the access time for each loader is 0.01 seconds, the control is virtually real time.
- Other Options
- Stamper
- Signal Tower
- Cue Tone Detection
- Leader Tape Rewind Motor: Allows custom positioning of splice at conclusion of wind mode
- Tape Side Detection: Detects oxide side of tape to confirm proper mounting of new pancake and prevent twisting of tape.
- Full Air Guide (Air Guides for magnetic side are standard)
- Constant Cleaner Tape Wind
- Adjustable Cleaner Tape Motor Speed
|
