Disc Capacity Supply & Eject Sides = 6 spindles (About 170 discs per spindle. Disc capacity depends on spindle shape. For details, contact Otari) Independent rejected disc reciever for supply and eject sides. Each reciever can contain about 80 discs. Writer Drive Layout 2 (horiz) by 5 (vert) The drive dock section has afloating construction to mechanically isolate it from the chassis. Supported Disc Shape 12 cm (Support for 8-cm disc is optional and requires adaptors) User Interface PC monitor, keyboard, and mouse are used to setup and operate the machine. Double-Feed Prevention Disc separator mechanism and double-feed detection sensors Transparent Disc Rejection Transparent protection in supply disc stacks are rejected on to rejected disc reciever without stopping production. Disc Transfer Time About 7.2 seconds (2-drive eject and supply operation) (The actual transfer time can vary according to drive to a drive's tray close/open time, etc.) Productivity Max. about 1,000 discs per hour (Excluding spindle exchange time and variations due to drives and media) Options Centralized Vacuum System Centralized Exhaust System Adapter for 8-cm Disc Controls POWER Switch, EMERGENCY STOP Switch, TURNTABLE TURN Switch, PC Monitor*, Keyboard, and Mouse. (* provided by the user) Dimensions 1,050 (W) x 1,600 (H) x 920 (D) mm (With signal tower: 1,828 (H) mm) Weight 330 kg Electricl Power Single Phase 100, 117, 220, 240 VAC ±10%, 50/60 Hz Power Consumption 1 kVA Air Source Primary Side Air Supply Pressure = Min. 0.5 MPa (dry air) Air Consumption 70 liters per minute (ANR) Vacuum Source Internal ejector system (Optional external vacuum system available) Specifications are subject to change without notice or obligation.