| Optical I/O [Contact Otari for support for single mode and connector type modification] |
| Type |
Multi mode glass fiber |
| Core Diameter |
62.5 μm |
| Connector |
SC type |
| Transmission Length |
less than 1.5 km (between points) |
| A/D Module |
| Number of Channels |
8 |
| Connector |
D-sub 25-pin |
| Input Impedance |
10 kΩ |
| Maximum Level (non-clipping) |
+24 dBu |
| Sample Rate |
44.1/48/88.2/96 kHz |
| A/D Conversion |
24-bit delta-sigma 128x oversampling |
| Frequency Response |
10 Hz to 22 kHz (+0/-1 dB) |
| Distortion |
less than 0.007% (1 kHz, peak) |
| Signal-to-Noise Ratio |
min. 108 dB (1 kHz, A-WTD) |
| Crosstalk |
min. 100 dB (1 kHz) |
| Mic Module |
| Number of Channels |
8 |
| Connector |
XLR3-32 x 8 |
| Input Impedance |
2 kohms, 10 kΩ (PAD ON) |
| Amp Gain Range |
+13 to +62 dB (PAD OFF)
-12 to +37 dB (PAD ON) |
| Maximum Level (non-clipping) |
+36 dBu |
| Sample Rate |
44.1/48/88.2/96 kHz |
| A/D Conversion |
24-bit delta-sigma 128x oversampling |
| Frequency Response |
10 Hz to 22 kHz (+0/-1 dB) |
| Noise |
Mic input EIN: less than -125 dBu (max. gain, terminated with 200Ω, PAD OFF) |
| Distortion |
less than 0.007% (1 kHz, peak) |
| Signal-to-Noise Ratio |
min. 102 dB (1 kHz, A-WTD) |
| Crosstalk |
min. 100 dB (1 kHz) |
| D/A Module |
| Number of Channels |
8 |
| Connector |
D-sub 25-pin |
| Output Impedance |
less than 5Ω |
| Reference Level |
+4 dBu (-20 dB from digital peak) |
| Maximum Level (non-clipping) |
+24 dBu (digital peak) |
| Sample Rate |
44.1/48/88.2/96 kHz |
| D/A Conversion |
24-bit Δ-Σ 128x times oversampling |
| Frequency Response |
10 Hz to 22 kHz (-0/-1 dB) |
| Distortion |
less than 0.007% (1 kHz, peak) |
| Signal-to-Noise Ratio |
min. 108 dB (1 kHz, A-WTD) |
| Crosstalk |
min. 100 dB (1 kHz) |
| AES/EBU Module |
| Number of Channels |
8 (operation mode (input or output) must be selected) |
| Format |
IEC 958, EIAJ CP-340, AES/EBU digital audio interface (with transformer)
Impedance: 110 ohms
Connector: XLR3-32 x 8 |
| Sample Rate Converter |
Acceptable Frequency Range: 32 kHz to 96 kHz |
| External Connection Terminal |
| Word Clock |
Frequency: 44.1/48/88.2/96 kHz (±100 ppm)
Connector: BNC |
| RS-422A |
RS-422A (TIA/EIA-422-B) |
| Misc. |
| Power Supply |
100-240 VAC (±10%) single phase 50/60 Hz |
| Power Consumption |
250 VA |
| Operating Environment |
Temperature = 5 to 40°C. Humidity = 20 to 80% (no condensation) |
| Weight |
25 kg (with modules) |
| Dimensions (W x H x D) |
482 x 354 x 332 mm |
| Specifications are subject to change without notice. |
